Skip to content

Furnace Repair in Campbell, CA

Serving Campbell and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (669) 267-6986

The short answer

FrostPeak AC Repair fixes furnaces in Campbell, CA, from our San Jose base about 5 miles east. We diagnose no-heat, short-cycling, and ignition problems, explain the cause, and let you decide on repairs. Bay Area Air District rules don't require replacing a furnace that still works.

Campbell winters are mild and damp, so many furnaces sit idle for long stretches and then have to run on cold, wet nights. When yours won't start, keeps shutting off, or blows cool air, FrostPeak AC Repair sends a technician from our San Jose base, about 5 miles east, to homes across Campbell's 95008 ZIP code. We find the actual cause, explain it in plain terms, and fix what makes sense to fix. You get a clear picture of your system before any work begins.

Common Furnace Problems in Campbell Homes

Santa Clara Valley winters are mild, so a Campbell furnace may run only on scattered cold mornings and evenings. During long idle stretches, dust settles on burners and flame sensors, and filters are easy to forget. Many of these problems show up during the first cold snap of the season.

  • No heat at all, or the blower runs but the air stays cool
  • Furnace starts, then shuts off after a few minutes (short cycling)
  • Igniter clicks or glows but the burners don't light
  • A burning dust smell that lasts well beyond the first few minutes of the season
  • Banging, squealing, or rattling from the cabinet or ducts
  • Thermostat calls for heat but nothing happens
  • Water around the furnace, which on high-efficiency models often means a clogged condensate line

How a Furnace Repair Visit Works

We start with the basics: thermostat settings and batteries, the filter, the furnace power switch, and the gas valve. Some no-heat calls end right there, and we'd rather tell you that than sell you a part. If the problem goes deeper, we test the ignition sequence step by step. That means checking the inducer motor, pressure switch, igniter, flame sensor, gas valve, and blower, and reading any error codes from the control board. This shows us where the sequence stops and why.

Before we do any work, we explain what failed, what the repair involves, and any other issues worth watching. Then you decide. Campbell homes often have furnaces in attics, garages, or hall closets. We work carefully in tight spaces and clean up when we're done.

Repair or Replace? What Bay Area Air District Rules Mean

Most furnace problems can be repaired, and repair is often the sensible choice. If we find a cracked heat exchanger, repeated major failures, or parts that are hard to get, we'll tell you directly.

Bay Area Air District rules matter here too, but they don't force anything on a working system. Under Rule 9-4, natural gas furnaces manufactured from 2029 must meet a zero-NOx emission standard. In practice, that points homeowners toward heat pumps when they replace a furnace after that date. The rules apply only when equipment fails or is replaced. They don't apply to a furnace that's working now.

If you're weighing a replacement, check BayREN and your local clean energy provider for current heat pump and electrification incentives. Amounts and availability change by funding cycle, so we confirm the current offer before we include it in a quote. The federal 25C tax credit covered heat pumps placed in service before December 31, 2025. It isn't available for new installations.

When to Shut Your Furnace Off

Some furnace problems shouldn't wait. If you smell gas, leave the house, don't flip switches or use appliances, and call your gas utility or 911 from outside. If a carbon monoxide alarm goes off, get everyone outside and call 911. Once the home has been cleared, we can find the cause.

Also turn the furnace off and call us if you see soot around the cabinet, a yellow or flickering flame instead of a steady blue one, or a breaker that keeps tripping. Every home with a gas furnace should have working carbon monoxide alarms. We're glad to check yours while we're there.

Serving Campbell and Nearby Communities

Campbell is about 5 miles west of our San Jose base in Santa Clara County, so we reach 95008 homes without a long drive. We also repair furnaces in nearby Monte Sereno, Los Gatos, Saratoga, Cupertino, and Santa Clara. If your furnace shares a blower and ductwork with your air conditioning, we can check both on the same visit. That's worth doing here, since inland parts of the valley get noticeably hot in summer.

More services in Campbell

Related

What to expect

How a visit goes

  1. Find the cause first

    We test the system and pinpoint what's wrong before suggesting parts or replacement, so you aren't paying to guess.

  2. Explain it in plain language

    You'll hear what failed, why it likely happened, and what each option involves, without jargon or pressure.

  3. Give you real choices

    When repair and replacement are both reasonable, we lay out the tradeoffs and let you choose what fits your home and plans.

FAQ

Common questions

Why does my furnace smell like burning when I first turn it on?

Dust settles on the burners and heat exchanger during the off season and burns off when the furnace first runs. A smell that fades within a few minutes is normal. If it lingers, smells electrical, or comes back every time the furnace runs, turn the system off and have it checked.

Do Bay Area Air District rules require me to replace my gas furnace?

No. The Air District's appliance rules don't require replacing working equipment. They apply only when an existing furnace fails or is replaced. Gas furnaces manufactured from 2029 must meet a zero-NOx standard, which in practice points homeowners toward heat pumps for replacements after that date.

Should I repair my furnace or switch to a heat pump?

It depends on the furnace's condition and what failed. Many problems, like a dirty flame sensor or a failed igniter, are straightforward repairs. If the furnace has a serious problem such as a cracked heat exchanger, we'll explain your options, including a heat pump, so you can decide.

Is there a federal tax credit for a new heat pump?

Not for new installations. The federal 25C credit covered qualifying heat pumps placed in service before December 31, 2025. Bay Area homeowners can check BayREN and their local clean energy provider for current incentives, and we confirm what's available before we quote it.

How often should I change my furnace filter?

Check the filter every month or two while the furnace is in use, and replace it when it looks dirty or when the manufacturer recommends. A clogged filter restricts airflow and can cause overheating and short cycling, which are common reasons for winter service calls.

Do you serve all of Campbell?

Yes. We serve homes throughout Campbell's 95008 ZIP code, along with nearby Monte Sereno, Los Gatos, Saratoga, Cupertino, and Santa Clara.

Tell us what your system is doing

Whether your AC is blowing warm air, your furnace won't start, or you're weighing a heat pump, contact FrostPeak AC Repair. We'll start with a diagnosis and walk you through your options.

Call (669) 267-6986 Request Service