Skip to content

Furnace Repair in Sunnyvale, CA

Serving Sunnyvale and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (669) 267-6986

The short answer

FrostPeak AC Repair diagnoses and fixes furnace problems in homes across Sunnyvale, from no heat and short cycling to ignition and airflow issues. If your furnace still works or can be repaired, Bay Area Air District rules don't require you to replace it.

Sunnyvale doesn't get harsh winters, but the Santa Clara Valley's mild, damp season still brings cool mornings and chilly evenings when you need a working furnace. Many furnaces sit idle through the long, dry summer, so problems often show up the first time the heat comes on in fall or on a cold night in December. FrostPeak AC Repair is based in San Jose, about 12 miles southeast, and we handle furnace repair throughout Sunnyvale, including ZIP codes 94085, 94086, 94087 and 94089. Below is what to expect from a repair visit, what you can check yourself, and how to think about repair versus replacement under current Bay Area rules.

Common Furnace Problems in Sunnyvale Homes

Most furnace trouble comes down to a handful of issues. Some are quick fixes. Others mean a part is near the end of its life.

A dusty smell for the first hour after months off is normal. If the smell lingers, or you see soot around the unit, have it checked.

  • No heat at all, even though the thermostat is calling for it
  • The blower runs, but the air coming out of the vents is cool or lukewarm
  • The furnace starts, then shuts off after a few minutes (short cycling)
  • A burning smell that doesn't fade after the first few hours of the season
  • Banging, squealing or rattling, or a loud boom when the burners light
  • Some rooms warm up while others stay cold
  • A pilot light that won't stay lit, or an igniter that won't glow

What Happens During a Furnace Repair Visit

We start by asking what you've noticed: when the problem started, whether it's constant or comes and goes, and whether any error codes are blinking on the control board. Then we test the system step by step. That includes the thermostat signal, power and safety switches, igniter or pilot, flame sensor, gas valve, inducer and blower motors, and the limit switch that shuts off the burners if the furnace overheats.

A clogged filter or blocked return vent causes more overheating shutdowns than most people expect, so we check airflow too. We also inspect the heat exchanger and venting for cracks, corrosion or disconnected sections, because those affect safety, not just comfort. Before any work begins, we explain what we found and what the repair involves so you can decide how to proceed.

Gas Smells and Carbon Monoxide: When to Stop and Get Out

Some furnace symptoms are safety problems, not repair questions. If you smell gas or rotten eggs, don't flip any switches or touch the thermostat. Leave the house and call your gas utility or 911 from outside. If your carbon monoxide alarm sounds, or people in the home have headaches, dizziness or nausea that ease when they step outside, get everyone out and call 911.

Once the utility or fire department says the home is safe, we can find and fix the cause. This is also a good time to make sure you have working CO alarms near sleeping areas and on each level of the house.

Repair or Replace? What the Bay Area Rules Mean for You

If your furnace still works or can be repaired, you don't have to replace it. The Bay Area Air District appliance rules apply only when an existing furnace fails or is replaced. They don't require anyone to swap out working equipment.

Looking ahead, Air District Rule 9-4 requires natural gas furnaces manufactured from 2029 on to meet a zero-NOx emission standard. In practice, that points homeowners toward heat pumps when they replace a furnace after that date. If your furnace is older and needs a major part, such as a heat exchanger or control board, it makes sense to weigh that repair against planning for a heat pump.

If you're considering a heat pump, note that the federal 25C tax credit only covered qualifying heat pumps placed in service before December 31, 2025. It isn't available for new installations now. Bay Area homeowners can still check BayREN and their local clean energy provider for current heat pump and electrification incentives. Amounts and availability change with each funding cycle, so we confirm the current offer before quoting it.

Quick Checks Before You Call

A few simple checks can sometimes save you a service visit:

If the furnace still won't heat after these checks, turn it off and schedule a repair. Don't keep resetting it.

  • Make sure the thermostat is set to Heat and above room temperature, and replace its batteries if it uses them
  • Check the circuit breaker and the furnace's power switch, which often looks like a light switch near the unit
  • Replace a dirty filter. A clogged one can trip the high-limit safety switch and shut the furnace down
  • Make sure the furnace's access panel is fully closed. Many furnaces won't run if it's loose
  • Move boxes, furniture or stored items away from supply and return vents

Serving Sunnyvale and Nearby Cities

We provide furnace repair across Sunnyvale and in nearby Mountain View, Santa Clara, Los Altos, Cupertino and Saratoga. Wherever you are in the area, a furnace that starts reliably and heats evenly makes the damp winter months much more comfortable.

More services in Sunnyvale

Related

What to expect

How a visit goes

  1. Find the cause first

    We test the system and pinpoint what's wrong before suggesting parts or replacement, so you aren't paying to guess.

  2. Explain it in plain language

    You'll hear what failed, why it likely happened, and what each option involves, without jargon or pressure.

  3. Give you real choices

    When repair and replacement are both reasonable, we lay out the tradeoffs and let you choose what fits your home and plans.

FAQ

Common questions

How long does a furnace repair usually take?

It depends on the problem. Common repairs, such as replacing an igniter, cleaning a flame sensor or swapping a failed switch, can often be done in one visit if the part is on hand. Motors, control boards and model-specific parts sometimes need to be ordered.

Is a burning smell from my furnace normal?

A dusty burning smell for the first hour or so after the furnace has been off for months is normal. It's dust burning off the heat exchanger. If the smell lasts longer, smells electrical, or comes with soot or smoke, turn the furnace off and have it inspected.

Do I have to replace my gas furnace with a heat pump?

No. Bay Area Air District rules don't require replacing working equipment. They apply only when a furnace fails or is replaced. Gas furnaces manufactured from 2029 on must meet a zero-NOx standard, which in practice points toward heat pumps for replacements after that date.

Why does my furnace keep turning on and off?

Short cycling is often caused by a clogged filter or blocked vents that make the furnace overheat and trip its safety limit. It can also come from a dirty flame sensor, a thermostat problem or an oversized system. Start by changing the filter. If that doesn't fix it, schedule a diagnosis.

Can I still get a federal tax credit for a heat pump?

The federal 25C credit only covered qualifying heat pumps placed in service before December 31, 2025, so it isn't available for new installations. Check BayREN and your local clean energy provider for current incentives. Offers change with each funding cycle, so we confirm the current offer before quoting it.

Which parts of Sunnyvale do you serve?

We serve all of Sunnyvale, including ZIP codes 94085, 94086, 94087 and 94089, along with nearby Mountain View, Santa Clara, Los Altos, Cupertino and Saratoga.

Tell us what your system is doing

Whether your AC is blowing warm air, your furnace won't start, or you're weighing a heat pump, contact FrostPeak AC Repair. We'll start with a diagnosis and walk you through your options.

Call (669) 267-6986 Request Service